Single-probe metal part detection systems for ferrous metals (steel and tinplate).
This unique compact, part detection control, when paired with a single sensor, will detect the presence of ferrous metal parts.
The difference between the two part detection controls is in the output on-time. The SC200 output turns on after the part is present for a minimum of 8 mS. It remains on during the presence of the part. The SC201 output turns on after the part is present for a minimum of 2 mS. It has a built-in pulse stretcher. It remains on during part presence and will not turn off until 25 mS has elapsed. When choosing the right controller, choose the SC200 for a slow operation and where 8 mS de-bounce is necessary to overcome the erratic motion of a part. Choose SC201 where 2 mS de-bounce will not allow the detection of the lead edge of a part multiple times and where the output must remain on for at least 25 mS to energize a relay coil or overcome a slow PLC scan time.
SC201, SC200,Build full system
Part detection control that's better for applications where the 2 mS de-bounce will not allow the detection of the lead edge of a part, multiple times and where the output must remain on for at least 25 mS to energize a relay coil or overcome a slow PLC scan time.specifications operating instructions
Our approach is simple. We listen to our customers. Because we know our products work well for various applications, we work closely with our customers to determine the system that will fit their needs.Â
Curious if one of our products will work for your specific application? Tell us about it. We will do what we can to help. Thatâ€™s our promise to you.
We are a customer-focused company. Our primary goal is to help you determine the product that will work best for your business. With Prime Controls, you will get individual attention and dedicated service. Your success is our success.