Air leak detection system for a variety of leak test machines.
Smart Test Module - air test module for containers. Combines pressure sensor and processor in one package for multiple types of air leak detection. Can be used for bell test, decay test, or peak pressure sensing.
RI100, RR100, STM1-1.5, STM1-15, STM1-5, T1, PIM1,
A reset illuminator designed to excite the RESET circuit of an STM1 pressure test module during air leak testing.specifications operating instructions
An infrared light receiver designed to sense the report output signal of the STM1 pressure test module.specifications operating instructions
Low pressure: 0 to 1.5 PSI range.specifications operating instructions
Low pressure: 0 to 15 PSI range.specifications operating instructions
Low pressure: 0 to 5 PSI range.specifications operating instructions
The last connector for STM Daisey Chain.specifications operating instructions
A microcontroller based interface module. The PIM1 connects between a master controller, such as a PLC, and one or more STM1 leak test modules, and translates simple ASCII commands from the master controller to message packets intelligible to the STM modules.specifications operating instructions
1 STM Series Control
1 RI100 Reset Illuminator
1 RR100 Infrared Light Receiver
1 T1 Connector
1 CBL112 Series Cable
1 CBL113 Series Cable
1 PIM1 Microcontroller Interface Module
Low cost single-probe, contacting double sheet detection system for thin steel and ferrous metals.
Air leak detection system for Borden/Alcoa-style can body leak testers.
We are a customer-focused company. Our primary goal is to help you determine the product that will work best for your business. With Prime Controls, you will get individual attention and dedicated service. Your success is our success.